Group,
I've inherited a Cisoc 3620 Router / Network - some info below. It is
used in a 256 Kbps link outbound only from here on Nauru via NSS5 and
Sydney. Inbound traffic is via a 'VSAT' reciever into the network.
One of its primary uses will be for outbound international calls - at
this stage - VOIP traffic via a PTSN network in Sydney. Secondary use
will be for Internet traffic.
What is needed is to prioritise traffic outbound from a Quintum AXT VOIP
Gateway - static IP - here, to its 'opposite number' - also a static IP
- in Sydney.
A "....simple QOS structure prioritizing traffic to www.xxx.yyy.zzz (our
VOIP Gateway) should suffice to start with...." is the request.
Would someone please point me in the right direction to achieve this,
assuming the 3620 (as configured) is capable.
Thanks,
Jon
*********************************************************************
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.0(7)T, RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 08-Dec-99 08:44 by phanguye
Image text-base: 0x600088F0, data-base: 0x60856000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
cisco 3620 (R4700) processor (revision 0x81) with 24576K/8192K bytes of
memory.
Processor board ID 19220100
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
********************************************************************
